PDA

View Full Version : Boeing 797



hieunguyen11
03-05-2012, 05:58 PM
BOEING 797
It can comfortably fly 10,000 Miles
at Mach 0.88 or 654 mph
with 1000 passengers on board !
They have kept this secret long enough.
This shot was taken last month by an amatuer photographer.

http://hoiquanphidung.com/uploadhinh/hqpd1/HQPD_1330970191.jpg

Boeing has been preparing a 1000 passenger jet that could reshape
the Air travel industry for the next 100 years. The radical Blended Wing design has been developed by Boeing in cooperation with the NASA Langley Research Center. The mammoth plane will have a wing span of 265 feet compared to the 747’s 211 feet, and is designed to fit within the newly created terminals used for the 555 seat Airbus A380, which is 262 feet wide. The new 797 is in direct response to the Airbus A380 which has racked up159 orders, but has not yet flown any passengers.

….There are several big advantages to the blended wing design, the most important being the lift to drag ratio which is expected to increase by an amazing 50%, with overall weight reduced by 25%, making it an estimated 33% more efficient than the A380, and making Airbus’s $13 billion dollar investment look pretty shaky. High body rigidity is another key factor in blended wing aircraft, it reduces turbulence and creates less stress on the air frame which adds to efficiency, giving the 797 a tremendous 8800 nautical mile range with its 1000 passengers flying comfortably at mach .88 or 654 mph cruising speed (another advantage over the Airbus tube-and-wing designed A380’s 570 mph)

http://hoiquanphidung.com/uploadhinh/hqpd1/HQPD_1330970367.jpg

The BOEING 797
Boeing is preparing this 1000 passenger Jet Liner that could reshape the Air Travel Industry. Its radical "Blended Wing & Fuselage" design has been developed by Boeing in cooperation with NASA Langley Research Centre. The mammoth aircraft will have a wing span of 265 feet compared to 211 feet of its 747, and its been designed to fit within the newly created Air Terminals for the 555 seat Airbus A380, which is 262 feet wide.

The new 797 is Boeing's direct response to the Airbus A380, which has racked up orders for 159 already. Boeing decided to kill its 747X Stretched Super Jumbo in 2003 after little interest was shown for it by Airline Companies, but continued to develop its "Ultimate Airbus Crusher", the 797 at its Phantom Works Research Facility in Long Beach, California.
The Airbus A380 had been in the works since 1999 and has accumulated $13 Billion in development costs, which gives Boeing a huge advantage. More so because Airbus is thus committed to the older style tubular structure for their aircraft for decades to come.

There are several big advantages in the "Blended Wing & Fuselage" design, the most important being the ‘Lift to Drag’ ratio which is expected to increase by an amazing 50%, resulting in an overall weight reduction of the aircraft by 25%, making it an estimated 33% more fuel efficient than the A380, and thus making the Airbus's $13 Billion Dollar investment look pretty shaky.
"High Airframe Rigidity" is another key factor in the "Blended Wing & Fuselage" technology. It reduces turbulence and creates less stress on the airframe which adds to fuel efficiency, giving the 797 a tremendous 10,000 Mile range with 1,000 passengers on board cruising comfortably at Mach 0.88 or 654 MPH, which gives it another advantage over the tube-and-wing designed A380's 570 MPH.

The exact date for introduction of the 797 is as yet unclear, but the battle lines are clearly drawn in the high-stakes war for future civilian aircraft supremacy.